IAN  T  COBB

A CASTLE CLOCK

by JOHN WILDING

CUT WHEELS & PINIONS

Wheels to be crossed out / Pinions supplied on stubs to be cut off and fitted to arbor  1/2/3 or 4 pinions on one stub  PHOTO 

ALL PRICES PLUS POSTAGE & PACKING

The Castle Clock is an 8-day weight driven wall clock designed to be mounted on a shelf bracket. It is intended that the movement be exposed to view and in consequence the plates are semi skeletonised. The movement is fitted with maintaining work and 'one at the hour' striking. The clock was designed for machining on one of the modern small and versatile lathes available today. In fact the entire construction including all the wheelcutting and the engraved dial were all carried out on the Unimat 3 lathe.
With 70 pages and over 250 illustrations and drawings.
This is a suitable project for the newcomer to clockmaking

Cutters Required Module 0.75                                                                                                                                                                                        Book is in Imperial Measurements

wheels and pinions are made to order  

ITEM

    p
GREAT WHEEL 17. 50
CENTRE WHEEL 14. 00
THIRD WHEEL 14. 00
ESCAPE WHEEL 15. 50
HOUR WHEEL 14. 00
MINUTE & REVERSE MINUTE WHEELS / 2 12. 50
BARREL RATCHET 21. 50
CENTRE, THIRD & ESCAPE PINIONS / 3        8 LEAF 21. 00
MOTION PINION 12. 50
BOOK 30. 00
CAST BRASS BELL 17. 50
 6" DIAL       Photo see photo

 

   
Back To J Wilding Clocks
Back To Clock Construction Books
ORDER FORM
Photo by kind permission of Mr J Wilding
   

Please verify prices before ordering as prices can fluctuate due to market forces