CUT WHEELS & PINIONS FOR

A 3/4 PENDULUM ELECTRIC CLOCK

by JOHN WILDING

Wheels to be crossed out / Pinions supplied on stubs to be cut off and fitted to arbor

 1/2/3 or 4 pinions on one stub PHOTO

ALL PRICES PLUS POSTAGE & PACKING

This, clock by John Wilding, was originally serialised in Model Engineer and was commissioned to be suitable for a complete beginner, not only a beginner to clock making but also for someone with little or no experience in the use of the lathe. The lathe chosen to illustrate the construction is the PEATOL, an inexpensive tool and one which is small and portable. On this lathe the entire construction has been carried out including the wheel cutting. The materials for the clock can be obtained in a pack from a supplier given in the text. All the parts and materials are readily available. This attractive wall clock is an excellent project for the newcomer to clockmaking.
There are 74 pages and over 300 illustrations which show every aspect of the construction including the making of the special tools such as the division plate and cutter frame required for the wheel cuttting   
                                                                                                                                     J Wilding
Cutters Module 0.45

This is a suitable project for the newcomer to clockmaking

wheels and pinions are made to order  

ITEM

       p
COUNT WHEEL 27. 50
CENTRE WHEEL 18. 50
INTERMEDIATE WHEEL 13. 50
HOUR WHEEL 13. 50
PINION 16 LEAF 16. 50
PINION 20 LEAF 17. 50
WORM BLANK 20. 50
BOOK 30. 00
   
 ORDER FORM
Back To J Wilding Clocks
Back To Clock Construction Books
Click on photo for more photos
Photos by kind permission of Mr J Wilding
Please verify prices before ordering as prices can fluctuate due to market forces