CUT WHEELS & PINIONS FOR

AN ENGLISH STYLE BRACKET CLOCK

by JOHN E TYLER

Wheels to be crossed out / Pinions supplied on stubs to be cut off and fitted to arbor

 1/2/3 or 4 pinions on one stub  PHOTO

Cutters Module 0.6, 0.55

ALL PRICES PLUS POSTAGE & PACKING  

This is a most comprehensive and detailed instruction book on how to make an English Style Bracket Clock. Every aspect of the construction is fully covered with over 100 illustrations and drawings. Even the engraving of the dial in the lathe is covered and full details of the construction of the case are also included. The author's workshop is very well equipped and full use is made of the wide range of tools and equipment he possesses. Some of the methods suggested such as milling the edges of the plates might be considered somewhat pedantic as these dimensions are not critical and this work is most usually done by filing. However the author has provided instructions which leave nothing to chance. The construction of the fusee in particular is fully covered and two appendices at the end of the book deal with the theory of the curve. The book is profusely illustrated and contains all the necessary working drawings in order to make both the case and the clock movement. The drawings were originally dimensioned in Imperial, but on bad advice were changed to Metric with a calculator, as at the time of publishing, the U.K. was in the throes of changing over. Those who wish to work in Imperial can easily change the dimensions back again.                                                                                                J Wilding

The book is now reprinted in 'workshop manual' form. This book has 93 pages and over 100 illustrations and drawings 

wheels and pinions are made to order  

ITEM

.     P
GOING TRAIN  
GREAT WHEEL 22. 50
CENTRE WHEEL 14. 50
THIRD WHEEL 14. 50
ESCAPE WHEEL 14. 50
HOUR WHEEL 14. 50
MINUTE & REVERSE MINUTE WHEELS / 2 14. 00
MAINTAINING RATCHET 20. 00
FUSEE RATCHET 12. 50
BARREL RATCHET 13. 00
STRIKE TRAIN  
GREAT WHEEL 22. 50
PIN WHEEL 14. 50
PALLET WHEEL 14. 50
WARNING WHEEL 14. 50
FUSEE RATCHET 12. 50
BARREL RATCHET 13. 00
CENTRE, PIN & PALLET PINIONS / 3 30. 00
THIRD, ESCAPE, WARNING & FLY  PINIONS     / 4,  7 LEAF ON ONE ARBOR CENTRED 30. 00
SAME ON INDIVIDUAL ARBORS FOR TURNING                   25.00 EACH

 

MOTION PINION 12. 50
MAINSPRINGS X 2 P.O.A.
CAST BRASS BELL 17. 50
BOOK 25. 00

 

Click here  for more  photo's  ORDER FORM
 Back To Home Page 
Back To Clock Construction Books
 
Photo's by kind permission of                Mr R Antrobus
 Click  Here for English Style Bracket Clock Revisited                                  by John Parslow
Please verify prices before ordering as prices can fluctuate due to market forces
 

Other Makers    JOHN WILDING       WILLIAM SMITH     ALAN TIMMINS         LIONEL BROWN

   PETER HEIMANN    COLIN J THORNE      IAN BEILBY           JOHN N W PAYNE      ELLIOTT ISAAC 

Material Quantity  
CZ120 Brass    
     
3/8" x 1/2" x 2.1/2" 1 Hour Wheel Bridge
1/8" x 12" x 9" 1 Plates
12g x 8" x 10" 1 Face Backing Plate
12g x 7 " x 7" 1 Chapter Ring
1/16" x 6" x 6" 1 Fly & Stop hooks
36g x 8" x 6" 1 Pendulum bob & Washers
     
CZ120 Blanks    
     
3/16" x 2.1/2" 1 Great Wheel Going
3/16" x 2.1/4"  1 Great Wheel Strike
3/16" x 1" 2 Barrel ratchets
12g x 2.1/4" 1 Maintaining Ratchet
12g x 2" 1 Hour wheel
12g x 1" 4 Minute wheels, Fusee ratchets
16g x 2.1/4" 1 Centre wheel
16g x 2" 3 Third, Pin, Pallet wheels
16g x 1.3/4" 1 Escape wheel
16g x 1.1/2" 1 Warning wheel
     
CZ121 Bar    
     
2" o/d x 4" 1 Fusees
3/4" x 3" 1 Hour wheel boss
5/8" x 6" 1 Crutch
1/2" x 300mm 1 Pillars
3/8" x 300mm 1 Stop hooks
5/16" x 300mm 1 Collets
1/4" x 300mm 1 Strike Mech
Tube    
     
2.3/8" x 4.1/2" 1 Barrels
     
Silver Steel     
     
3/4" x 13" 1 Barrel arbors
5/16" x 13" 1 Fusee arbors
1/4" x 13" 2 Pinions
1/8" x 13" 2 Arbors
1/16" x 13 1 Pins
     
Ground Flat    
     
1/8" x 3" x 3" 1 Pallets
3/32 x 3" x 3" 1 Maintaining spring
     
Mild steel    
     
5/16" x 300mm 1 Hammer shaft
     
5/16"sq x 300mm 1 Hammer arbor
1/4"sq x 300mm 1 Stub arbors
     
1/16" x 16" x 6" 1 Rack ect